EconoEPT  shop  made in China - replacement parts -  in Ogbomosho Nigeria  al Type Powder Paint Production Line with top quality

We – EPG Group the most significant gearbox & motors , torque limiter couplings and gears manufacturing unit in China with 5 distinct branches. For a lot more particulars: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828

one. Mixers:

one.1 Automated Container Mixer

Computerized container mWhen a torque overload takes place, the transmitted torque will exceed the established torque level of the Torque Limiter. When this takes place, the frictional drive is no for a longer time powerful adequate to transmit the torque from the driving shaft to the pushed member, and the driven member slips among the friction disks. When the torque overload is removed, the Torque Limiter immediately resets and resumes transmitting torque.ixer is wor ept with steady content trolleys, the container fills the components and lifted up and connnected tightly with mixing head immediately. The mixing head tilts jointly with the containers, and then acquire the homogeneous mixing result, right after finishing mixing as per setting time, and return to authentic place, the complete process will be managed by PLC

Principal Features:

Several detachable containers for circular operation
Substantial performance
Adopting PLC to understand automation
Homogenized combination
No curing granule
Hassle-free for cleaning and maintenance
Safe and relaiable procedure

Technological Info:

Model Volume (L) Output (kg/tank) Mixing Motor (kw) Tilting Motor (kw) Crushing Motor (kw) Mixing Time (min) Management Method Total Dimensions (MM)
FHJ-fifteen fifteen 8 1.five     five-ten PLC  750*480*950
FHJ-a hundred and twenty one hundred twenty 60 five.5 .2   five-10 PLC  1800*1800*1950
FHJ-150  one hundred fifty 70 5.five .37 two.2 5-ten PLC  2150*1100*2300 
FHJ-three hundred three hundred a hundred and fifty fifteen three 2.two 5-ten PLC  2150*1100*2300 
FHJ-600  600 three hundred 22 four four five-ten PLC  2650*1250*2700 
FHJ-a thousand 1000 five hundred 30 four 4 five-10 PLC  2900*1550*3100 
FHJ-2000  2000 a thousand 45 five.five 5.5 five-ten PLC  3500*2350*3650 

one.2 High Velocity Pre-Mixer:


Large effectiveness & effortless operation

Effortless colour shifting, protected cleansing

Blended mixing & crushing as a single

Mixing time preseting, quick & homogeneous

Excellent sealing, powder lea ept totally free

Vertical or horizontal kind as optional

Specialized Data:

Model Quantity (L) Mixing Motor (kw) Crushing Motor (kw) Mixing Time (min) Overall Dimensions (mm)
GHJ-20 twenty .fifty five .37 3-five seven-hundred*five hundred*800
GHJ-one hundred a hundred 3 1.five 3-5 one thousand*600*900
GHJ-200 200 five.five 3 three-five 1500*900*1400
GHJ-300 300 seven.five 4 3-6 1800*900*1400
GHJ-500 500 fifteen five.five four-six 1800*1300*1800
GHJ-800 800 eighteen.5 7.5 four-six 1900*1300*2000
GHJ-one thousand 1000 22 seven.5 4-six 2300*1400*2000

1.3 Double Cone Mixer:

This twin-cone mixer is composed of a rotating container with two cones and two stirrers. This machine is applicable for powder coating, pharmaceutical, chemical, foodstuff, dyestuff, and other multi-compound resources. It has remarkable effect in mixing powders and particles with reasonably excellent fluidity. Its barrel is produced of stainless metal, which is polished equally inside and outside the house, showcasing stunning visual appeal and straightforward operation.

Specialized Knowledge:

Model Quantity (L) Output (kg/tank) Rotating Motor (kw) Mixing Motor (kw) Mixing Time (min) Overall Dimensions (mm)
SXH-a hundred 300 a hundred and fifty one.five 1.five -30 1760*830*2030
SXH-200 400 two hundred 1.5 one.five -thirty 1830*830*2150
SXH-300 600 three hundred 2.two 1.5 -thirty 1980*a thousand*2275
SXH-five hundred a thousand five hundred 4 four one-30 2630*1140*2620
SXH-one thousand 2000 a thousand five.5 5.5 -30 3060*1440*2860
SXH-1500 3000 1500 seven.5 7.five -thirty 3700*2000*2970
SXH-2000 4000 2000 8.five eight.5 -thirty 3800*2500*3500

2. Twin-Screw Extruder

2.1 Large torque & High Pace Rotation Twin-Screw Extruder:

Major Attributes:

*Entire Gearbox from specialist EPT maker, lower sound, resilient longevity

*Substantial screw velocity, substantial shearing, swift discharge

*Impartial lube oil cooling system design

*Torque limiter to safeguard the drive prepare

*Suitable for reclaim powder, special powder production

*Split design and style of barrel and liner inserts for straightforward cleaning and maintainence

*Prime & Facet feeding alternatives

*Other functions exact same as traditional sort extruder

Technological Parameters:

Model Ability (kg/h) Screw Diameter (mm) Screw Length (mm) Screw Speed (r/min) Major Motor (kw) Feeder Motor (kw) Heating Power (kw) All round Dimensions (mm)
TSX-40 80-260 forty 16D -800 11/fifteen/18.5 .fifty five eight 1850*seven-hundred*1750
TSX-52 one hundred fifty-450 52 16D -800 22/thirty/37 .75 10 2700*900*2200
TSX-sixty five 400-one thousand sixty five 16D -800 45/55/seventy five twelve 2900*one thousand*2400
TSX-seventy five 800-1200 75 16D -800 seventy five/ninety 1.five 16 3100*1200*2500
TSX-eighty five 1200-1800 eighty five 16D -800 ninety/one hundred ten two.2 twenty 3700*1500*2900

2.2 Conventional Sort Co-Rotation Parallel Twin Screw Extruder


*Sturdy shearing, easy cleaning

*Exact automobile temperature handle, substantial cooling & heating exchagne

*Hinged clamshell type barrel opening, segmented liners for easy replacing and expense preserving

*Feeder straightforward assembly & disassembly, internal composition to stay away from agglomeration

*Configurable screw applied for defferent powder formulas

*Screw and barrel adopt unique materials like Cr12MoV, CPM, etc., higher putting on resisting

*Really gearbox with lower sounds dB amount

*Torque limiter to protect the drive teach

*Reduced vitality consumption

Complex Parameters:

Product Capability (kg/h) Screw Diameter (mm) Screw Size Screw Velocity (r/min) Main Motor (kw) Feeder Motor (kw) Heating Electrical power (kw) All round Proportions (mm)
SLJ-forty eighty-220 forty 16D -five hundred 11/15/18.five .55 4 1800*600*1700
SLJ-fifty one hundred fifty-300 50 16D -five hundred 22/30 .75 eight 2600*700*2000
SLJ-55 300-400 55 16D -five hundred 30/37 .75 eight 2700*900*2300
SLJ-sixty 400-600 60 16D -five hundred 45 12 2750*a thousand*2350
SLJ-seventy five 600-800 75 16D -five hundred 55 one.five twelve 2900*1100*2400
SLJ-eighty 800-1200 80 16D -five hundred 75/90 two.2 20 3700*800*2800

2.3 Lab Type Extruder

Technological Parameters:

Model Ability (kg/h) Screw Diameter (mm) Screw Duration Screw Pace (r/min) Primary Motor (kw) Feeder Motor (kw) Heating Power (kw) Overall Dimensions (mm)
TSX-twenty .2-ten 22 16D -600 two.2-4 .1 two 1600*300*850
SLJ-thirty one-thirty 30 16D -500 3-5.five .18 3.2 1430*550*1300
SLJ-32 40-80 32 16D -five hundred seven.5/11 .twenty five three.2 1600*500*1500

3 Cooling Belt

3.1 Water Cooled Cooling Belt with Flaker:


Steady top quality imported steel belt

Base cooling h2o spraying technique, installed heating and cooling system

Outfitted with information unit to keep away from deforming

Far better cooling consequence, higher efficient productiveness

Couple of routine maintenance and effortless cleansing

Chips thickness and roller pace adjustable

Crusher with finger pin and teeth kind

Minimized cross contamination, simple procedure

Complex Parameters:

Design Roller Dia. (mm) Belt Width (mm) Belt Size (mm) Push Motor (kw) Capacity (kg/h) Cooling Method Total Proportions (mm)
GDY-406 220 600 4000 one.five two hundred-400 Cooled Water 4000*750*1600
GDY-508 325 800 5000 3 400-five hundred Cooled Water 5000*900*1800
GDY-510 325 a thousand 5000 three 500-seven-hundred Cooled H2o 5000*1100*1900
GDY-610 440 one thousand 6000 four 600-800 Cooled Drinking water 6000*1100*1900
GDY-612 440 1200 6000 4 seven hundred-900 Cooled Drinking water 6000*1400*1900
GDY-712 600 one thousand 7000 five.five 900-1200 Cooled Drinking water 7000*1400*2000

three.2 Air Cooled Sort Caterpillar Cooling Belt with Flaker:


Stainless metal produced caterpillar, air cooling

Flake chips thichness and conveying speed adjustable

Reasonable style for cooling rollers inside, professional surface therapy to stay away from drinking water lea ept and rust

Mounted with simplified air conditioning system

Risk-free operation, like crisis button, clockwise and counter-clockwise rotation.

Technological Parameters:

Model Roller Dia. (mm) Belt Width (mm) Belt Duration (mm)  Travel Motor (kw) Blower Motor (kw) Ability (kg/h) Cooling Mode General Proportions (mm)
JFY-204  one hundred sixty/one hundred sixty four hundred 2000 .55 two hundred-400 30-one hundred Chilled Water&Air 2000*450*900
JFY-406 one hundred sixty/220 600 4000 .seventy five 400-five hundred one hundred-220 Chilled H2o&Air 4000*850*950
JFY-508 180/325 seven hundred 5000 .75 500-700 220-400 Chilled Water&Air 5000*1050*1200
JFY-510 180/325 800 5000 1.1 600-800 four hundred-five hundred Chilled Water&Air 5000*1150*1200
JFY-610 180/325 800 6000 700-900 five hundred-seven hundred Chilled Water&Air 6000*1150*1200
JFY-710 one hundred eighty/325 one thousand 6000 1.five 900-1200 600-900 Chilled Drinking water&Air 7000*1250*1450
JFY-812 one hundred eighty/325 a thousand 7000 2.2 900-1200 900-1200 Chilled Water&Air 8000*1650*1600

three.3 PU Kind Air Cooled Cooling Belt


Adjustable thichness and roller velocity

Air cooled to steer clear of cross contamination

Roller and crusher outfitted with overload protection

Substantial efficiencies

One piece PU belt to faciliate simple cleansing and servicing

Compact design and style for limited place

Complex Parameters:

Product Roll Dia. (mm) Band Width (mm) Band Size (mm) Motor Power (kw) Throughput (kg/h) Proportions (mm)
PFY-104 156 400 1000 50 1000*870*1050
PFY-206 220 600 2000 one hundred fifty 2000*1150*1100
PFY-208 445 800 2000 two.two three hundred 2000*1100*1100
PFY-210 445 one thousand 2000 two.2 five hundred 2000*1300*1100
PFY-310 622 a thousand 3000 two.two 800 2000*1300*1200

4 ACM (Air Classifier Mill) Grinding Program


Protection in accordance with EU explosion resistant common ATEX/PSR11

Low sound style (from mill to enthusiast system)

Particle size distribution adjustable on request

Mill human body temperature and air consumption volume monitoring

Rotary sieve with distinctive design and style and tough for mesh use problem

Whole grinding technique created for powder dust cost-free

Concluded powder goods with far more than ninety eight p.c

High output, straightforward operation cleansing and routine maintenance

Technological Parameters:

Product Mill Motor kw Rotor rpm Classifier Motor Classifier rpm Admirer kw Air cbm/h Potential kg/h Total dimensions mm
ACM-02 two.two 12000 .37 -3000 three 350 2-thirty 1430*550*1300
ACM-05 4 11000 .75 -3000 4 800 thirty-80 2100*one thousand*2150
ACM-ten 7.5 7000 one.5 -3000 11 2500 a hundred-260 6200*1250*3200
ACM-fifteen eleven 7000 1.5 -3000 15 3000 200-350 6500*1300*3300
ACM-twenty fifteen 6600 2.2 -3000 22 3500 300-400 7500*1300*3600
ACM-thirty 22 5500 3 -3000 30 4500 400-550 7900*1500*3600
ACM-40 thirty 4600 5.5 -3000 37 5500 600-800 8000*1700*3600
ACM-50 37 4000 seven.five -3000 forty five 6500 one thousand-1200 9000*1900*3900
ACM-60 45 3500 7.5 -3000 fifty five 8000 1200-1600 9000*2000*4000


Xihu (West Lake) Dis.sunlight is a major company in China of Powder Coating Manufacturing Equipments, i.e. Mixers, Extruders, Cooling Belt and Air Classifier Mill. We inherit 30 a long time of experiences in this ept and have exported to nearly thirty countries and regions in the earlier 10 years, and win broadly great reputations.

We handed CE certification acceptance and ATEX explosion resistant test, and many others. global standards, we do know how to fulfill the diversified and customized produced requests of our consumers.

Our everlasting organization philosophy: consistant high quality, powerful conversation, liable service.

The use of first equipment manufacturer’s (OEM) part quantities or logos , e.g. CASE® and John Deere® are for reference reasons only and for indicating merchandise use and compatibility. Our company and the detailed substitution parts contained herein are not sponsored, accredited, or made by the OEM.

EconoEPT  shop  made in China - replacement parts -  in Ogbomosho Nigeria  al Type Powder Paint Production Line with top quality

EconoEPT  shop  made in China - replacement parts -  in Ogbomosho Nigeria  al Type Powder Paint Production Line with top quality

EconoEPT  shop  made in China - replacement parts -  in Ogbomosho Nigeria  al Type Powder Paint Production Line with top quality