Item Description
WSL Sort Cardan Shaft(JB/T7846.two–2007)
Cardan shaft is broadly used in rolling mill, punch, straightener, crusher, ship push,paper producing tools, widespread machinery, h2o pump tools,test bench and other mechanical applications.
Cross variety universal joints for straightening equipment are largely appropriate for flat sheet straightening devices.
It is also suited for other mechanical gear, whose rotation diameter is all around 46 ~ 150mm, and the nominal torque is 90-6300N.m.
Axis angle <= 10
Software: straightening device specifically for roller straightening machine and other mechanical machine.
·Parameter And Major Dimension(JB/T7846.two–2007)
| Type | Nominal Torque Tn/N·m |
Equipment base stop | Gear foundation conclude | Straightening machine conclude | L | Rotary Inertia kg·mtwo |
Max mass kg |
|||||||
| d1 | L1 | done | Lthree | d2 | Ltwo | Dtwo | Lfour | |||||||
| Y variety | Jone type | Y type | Jone kind | |||||||||||
| WSL1 | 90 | 20,22,24 | fifty two | 38 | forty six | 100 | 20,22,24 | 52 | 38 | 46 | 100 | 800 | .003 | 7 |
| 25,28 | sixty two | 44 | 46 | 100 | 25,28 | 62 | 44 | 820 | 0.0076 | 9 | ||||
| 30,32,35,38 | 82 | sixty | fifty eight | a hundred and twenty | ||||||||||
| WSL2 | 315 | 30,32,35,38 | 82 | 60 | 58 | 120 | 30,32,35,38 | 82 | 60 | 58 | 120 | 840 | .01 | 12 |
| 40,42,forty five,forty eight,fifty | 112 | eighty four | 70 | one hundred sixty | 880 | .018 | 15 | |||||||
| WSL3 | 500 | forty,forty two,forty five,forty eight,fifty | 112 | eighty four | 70 | one hundred sixty | 40,forty two,forty five,48,fifty | 112 | 84 | 70 | 160 | 920 | .571 | 19 |
| 55,fifty six | 112 | eighty four | ninety | two hundred | 960 | 0.051 | 25 | |||||||
| sixty,63,65 | 142 | 107 | 90 | 200 | ||||||||||
| WSL4 | 1400 | 55,56 | 112 | eighty four | ninety | 200 | fifty five,56 | 112 | eighty four | 90 | 200 | 1200 | .077 | 38 |
| 60,sixty three,sixty five | 142 | 107 | 90 | two hundred | 60,63,65 | 142 | 107 | 1210 | 0.16 | 44 | ||||
| 70,seventy one,75 | 142 | 107 | 120 | 210 | ||||||||||
| WSL5 | 4000 | 70,71,seventy five | 142 | 107 | a hundred and twenty | 210 | 70,71,seventy five | 142 | 107 | 120 | 210 | 1200 | .19 | 54 |
| eighty,85,90,ninety five | 172 | 132 | one hundred fifty | 260 | 1270 | .37 | sixty five | |||||||
| WSL6 | 6300 | eighty,eighty five,ninety,95 | 172 | 132 | a hundred and fifty | 260 | 80,85,90,95 | 172 | 132 | 150 | 260 | 1320 | .forty eight | 86 |
·Notice:L-Set up duration
Thorough Photographs
Packaging & Shipping and delivery
Company Profile
HangZhou CZPT Equipment Manufacturing Co., Ltd. is a high-tech business specializing in the design and manufacture of numerous sorts of coupling. There are 86 employees in our organization, which includes 2 senior engineers and no fewer than 20 mechanical design and style and manufacture, warmth treatment, welding, and other specialists.
Innovative and sensible process, comprehensive detection signifies. Our company actively introduces foreign superior technologies and products, on the foundation of the condition, we make full use of the benefit and do far more study and innovation. Rigorous to higher good quality and run strictly in accordance with the ISO9000 quality certification system common mode.
Our business materials diverse kinds of goods. High high quality and reasonable value. We stick to the theory of “quality very first, provider initial, constant enhancement and innovation to meet up with the customers” for the administration and “zero defect, zero grievances” as the high quality objective.
Our Providers
one. Layout Solutions
Our layout staff has experience in Cardan shafts relating to merchandise layout and growth. If you have any needs for your new merchandise or desire to make additional advancements, we are listed here to offer our help.
2. Product Providers
raw components → Cutting → Forging →Rough machining →Shot blasting →Heat treatment method →Testing →Fashioning →Cleaning→ Assembly→Packing→Shipping
three. Samples Procedure
We could produce the sample according to your necessity and amend the sample continuously to meet up with your need to have.
four. Study & Development
We generally research the new demands of the market and produce new versions when there are new cars in the marketplace.
5. Top quality Management
Each and every step need to be a certain test by Expert Personnel in accordance to the common of ISO9001 and TS16949.
FAQ
Q 1: Are you a investing business or a maker?
A: We are a professional manufacturer specializing in producing
a variety of sequence of couplings.
Q 2:Can you do OEM?
Of course, we can. We can do OEM & ODM for all consumers with tailored PDF or AI structure artwork.
Q 3:How lengthy is your supply time?
Generally, it is 20-30 days if the items are not in inventory. It is in accordance to quantity.
Q 4: Do you supply samples? Is it free or additional?
Of course, we could provide the sample but not for free of charge. Truly, we have an outstanding cost theory, when you make the bulk get the price of the sample will be deducted.
Q 5: How extended is your guarantee?
A: Our Warranty is twelve months beneath regular situation.
Q 6: What is the MOQ?
A: Normally our MOQ is 1pcs.
Q 7: Do you have inspection techniques for coupling?
A:one hundred% self-inspection ahead of packing.
Q 8: Can I have a visit to your manufacturing unit ahead of the get?
A: Positive, welcome to check out our manufacturing facility.
Q 9: What’s your payment?
A:1) T/T.
♦Get in touch with Us
World wide web: huadingcoupling
Add: No.11 HangZhou Road,Chengnan park,HangZhou City,ZheJiang Province,China
|
/ Piece | |
1 Piece (Min. Order) |
###
| Standard Or Nonstandard: | Standard |
|---|---|
| Shaft Hole: | 19-32 |
| Torque: | 70-80N.M |
| Bore Diameter: | 14mm |
| Speed: | 6000r/M |
| Structure: | Rigid |
###
| Samples: |
US$ 500/Piece
1 Piece(Min.Order) |
|---|
###
| Customization: |
|---|
###
| Type | Nominal Torque Tn/N·m |
Gear base end | Gear base end | Straightening machine end | L | Rotary Inertia kg·m2 |
Max mass kg |
|||||||
| d1 | L1 | d1 | L3 | d2 | L2 | D2 | L4 | |||||||
| Y type | J1 type | Y type | J1 type | |||||||||||
| WSL1 | 90 | 20,22,24 | 52 | 38 | 46 | 100 | 20,22,24 | 52 | 38 | 46 | 100 | 800 | 0.003 | 7 |
| 25,28 | 62 | 44 | 46 | 100 | 25,28 | 62 | 44 | 820 | 0.0076 | 9 | ||||
| 30,32,35,38 | 82 | 60 | 58 | 120 | ||||||||||
| WSL2 | 315 | 30,32,35,38 | 82 | 60 | 58 | 120 | 30,32,35,38 | 82 | 60 | 58 | 120 | 840 | 0.01 | 12 |
| 40,42,45,48,50 | 112 | 84 | 70 | 160 | 880 | 0.018 | 15 | |||||||
| WSL3 | 500 | 40,42,45,48,50 | 112 | 84 | 70 | 160 | 40,42,45,48,50 | 112 | 84 | 70 | 160 | 920 | 0.023 | 19 |
| 55,56 | 112 | 84 | 90 | 200 | 960 | 0.051 | 25 | |||||||
| 60,63,65 | 142 | 107 | 90 | 200 | ||||||||||
| WSL4 | 1400 | 55,56 | 112 | 84 | 90 | 200 | 55,56 | 112 | 84 | 90 | 200 | 1200 | 0.077 | 38 |
| 60,63,65 | 142 | 107 | 90 | 200 | 60,63,65 | 142 | 107 | 1210 | 0.16 | 44 | ||||
| 70,71,75 | 142 | 107 | 120 | 210 | ||||||||||
| WSL5 | 4000 | 70,71,75 | 142 | 107 | 120 | 210 | 70,71,75 | 142 | 107 | 120 | 210 | 1200 | 0.19 | 54 |
| 80,85,90,95 | 172 | 132 | 150 | 260 | 1270 | 0.37 | 65 | |||||||
| WSL6 | 6300 | 80,85,90,95 | 172 | 132 | 150 | 260 | 80,85,90,95 | 172 | 132 | 150 | 260 | 1320 | 0.48 | 86 |
|
/ Piece | |
1 Piece (Min. Order) |
###
| Standard Or Nonstandard: | Standard |
|---|---|
| Shaft Hole: | 19-32 |
| Torque: | 70-80N.M |
| Bore Diameter: | 14mm |
| Speed: | 6000r/M |
| Structure: | Rigid |
###
| Samples: |
US$ 500/Piece
1 Piece(Min.Order) |
|---|
###
| Customization: |
|---|
###
| Type | Nominal Torque Tn/N·m |
Gear base end | Gear base end | Straightening machine end | L | Rotary Inertia kg·m2 |
Max mass kg |
|||||||
| d1 | L1 | d1 | L3 | d2 | L2 | D2 | L4 | |||||||
| Y type | J1 type | Y type | J1 type | |||||||||||
| WSL1 | 90 | 20,22,24 | 52 | 38 | 46 | 100 | 20,22,24 | 52 | 38 | 46 | 100 | 800 | 0.003 | 7 |
| 25,28 | 62 | 44 | 46 | 100 | 25,28 | 62 | 44 | 820 | 0.0076 | 9 | ||||
| 30,32,35,38 | 82 | 60 | 58 | 120 | ||||||||||
| WSL2 | 315 | 30,32,35,38 | 82 | 60 | 58 | 120 | 30,32,35,38 | 82 | 60 | 58 | 120 | 840 | 0.01 | 12 |
| 40,42,45,48,50 | 112 | 84 | 70 | 160 | 880 | 0.018 | 15 | |||||||
| WSL3 | 500 | 40,42,45,48,50 | 112 | 84 | 70 | 160 | 40,42,45,48,50 | 112 | 84 | 70 | 160 | 920 | 0.023 | 19 |
| 55,56 | 112 | 84 | 90 | 200 | 960 | 0.051 | 25 | |||||||
| 60,63,65 | 142 | 107 | 90 | 200 | ||||||||||
| WSL4 | 1400 | 55,56 | 112 | 84 | 90 | 200 | 55,56 | 112 | 84 | 90 | 200 | 1200 | 0.077 | 38 |
| 60,63,65 | 142 | 107 | 90 | 200 | 60,63,65 | 142 | 107 | 1210 | 0.16 | 44 | ||||
| 70,71,75 | 142 | 107 | 120 | 210 | ||||||||||
| WSL5 | 4000 | 70,71,75 | 142 | 107 | 120 | 210 | 70,71,75 | 142 | 107 | 120 | 210 | 1200 | 0.19 | 54 |
| 80,85,90,95 | 172 | 132 | 150 | 260 | 1270 | 0.37 | 65 | |||||||
| WSL6 | 6300 | 80,85,90,95 | 172 | 132 | 150 | 260 | 80,85,90,95 | 172 | 132 | 150 | 260 | 1320 | 0.48 | 86 |
Safety Precautions For a PTO Shaft
When you are working around PTOs, be sure to observe several safety precautions. These include removing the shield, keeping a safe distance from the machine, and avoiding entanglement. Entanglement is a serious injury that can even lead to death. Workers who are near the machine should always maintain a safe distance, especially if the speed of the machine is fast enough to entangle clothing. The speed of the PTO is usually 540 to 1,000 revolutions per minute, and the speed is enough to cause injury in a split second.
Safety precautions
One of the most important safety precautions for a PTO shaft is to make sure that it is properly guarded at all times. An unguarded PTO shaft can entanglement a worker, cause an injury, or even cause death. Operator awareness is key in preventing this hazard. Among other things, workers should not make repairs while the PTO is in use or wear loose or frayed clothing when working near the PTO. Likewise, they should read and follow instructions provided with their tractor and implement. Finally, they should use PTO shafts only for their intended purpose.
Another important safety precaution is to wear a protective gear such as a helmet and gloves before operating a PTO shaft. This type of equipment can be extremely dangerous because of its speed. A PTO shaft that is rotating at 540 rpm can travel two metres in less than a second. Damaged shielding is a common cause of entanglement, so it is important to check your machinery for damage before operating it.
When operating a tractor, PTOs should be kept clear of loose clothing. Loose clothing can easily catch on a rotating PTO shaft. Long hair or jewelry can also become entangled in a PTO shaft. It is also important to remember to secure the PTO shaft guard when the tractor is not in use. Also, never engage a PTO when the engine is off.
Types of pto shafts
PTO shafts are used in tractors and other equipment to secure the secondary gear in the tractor. They are available in different styles and sizes. These shafts are designed to withstand pressure, impacts, and tension. They may also include a shear pin and slip clutch. Before buying a new PTO shaft, make sure to check its measurements.
There are two types of PTO shafts available in an Agric rototiller. The first one has a slip clutch and the other has a shear pin safety device. In order to identify the type of PTO shaft used in a particular tractor, it is important to understand what it is used for.
There are two types of PTO shafts: the external and internal. The latter is used for larger machines, such as a lawnmower. The former is suitable for agricultural applications and is the preferred type for large tractors. The former is suitable for plowing, mowing, and shredding.
Transmission PTO shafts are the oldest type of PTO. They are connected to the tractor’s transmission. When a tractor is in gear, it stops the PTO shaft. However, when it’s not, it’s ineffective and can pose serious problems, such as when mowing. This type of PTO can also cause an overrun clutch to prevent the PTO shaft from working properly.
Reaction time
It’s important to know your reaction time when working around a power take-off (PTO) shaft. This part of the machine rotates at approximately 540 revolutions per minute and can pull in seven feet per second. Reaction time can be affected by age, physical condition, medications, lack of sleep, and stress. If you’re working around a PTO, be sure to remove any loose jewelry or other items that might interfere with your reaction time.
PTO accidents can be caused by several factors. The operator, the machine, and the environment all play a role. The operator’s physical and mental condition can also contribute to unsafe actions. For example, young operators may lack the knowledge and experience to recognize hazards. Older workers may also have slower reaction times, which can make it difficult to react quickly to slippery work areas.
Reaction time is measured as the time between a stimulus and the response. It does not include the time required to move the hand. Reaction time is a critical factor in sports, where athletes need to be quick to respond to the moves of their opponents. A good reaction time is necessary to score points.
A demonstration of the speed of a PTO shaft is a great tool to demonstrate how dangerous this part of a machine can be. To demonstrate the speed, use a 7-foot sash cord tied to a sliding collar universal joint. Select a 540-rpm PTO shaft, and a three-inch diameter shield. In one second, the rotating shaft makes nine revolutions and travels 7.1 feet. However, a cordless drill does not rotate at full speed and will take at least two seconds to wrap around the string.
Standardization
The standardization of PTO shafts in tractors is a major project. The EU Machinery Directive requires the protection of operators from rotating parts, such as the PTO. This is especially important when parts are accessible, as clothing can easily be wrapped around them, resulting in an accident. To prevent such accidents, manufacturers have begun to install non-rotating guards over the PTO drive shaft. These guards comply with the current EU good practice.
The European Standard EN 12965:2003+A2:2009 specifies the safety requirements for PTO drive shafts and their guards. It also specifies safe working practices for these components. The standard was approved by CEN on 16 September 2019. It is important to follow these regulations to ensure safe operation.
In the 1980s, a movement began among agricultural engineers to standardize the PTO shaft. The movement began because the different types of PTO shafts had not been interchangeable. A common example is the Deutz-Fendt shaft, which had become a standard for tractors.
As the power for PTO drives comes from the gearbox, the counter shaft acts as the PTO outlet. Standardization of PTO speeds makes it easier for manufacturers to design equipment to meet a specified speed. For example, a thresher is expected to run at a specific peripheral velocity of the threshing cylinder, which is a function of standard PTO speeds. This also allows designers to plan pulley arrangements with the standard PTO speed in mind.
Safety chains
The PTO shaft is an integral part of a tractor or implement, so it’s essential to secure it with safety chains. These chains are welded to both ends of the shaft and serve as backup connections between the tractor and trailer coupling point. There are several types of chains available, from domestic to metric, to meet your specific needs.
Because of the high speeds of PTO shafts, it’s crucial to protect these parts from being tangled. A single fall of a PTO shaft can cause serious injury or even death. In such an unfortunate situation, safety chains can prevent such injuries. PTO shafts are also extremely dangerous because the components can become hot while they are operating.
In addition to safety chains, operators must also be aware of the hazards that can occur when working near a PTO shaft. Unsafe behaviors, such as performing repairs while operating a machine, or wearing frayed clothing can lead to serious injury or death. In addition, all users should follow the instructions on the tractor or implement they’re using. It’s also essential to use a PTO shaft for its intended purpose.
In addition to safety chains, farmers should also ensure that the PTO drive shaft is securely attached to the tractor or implement. A broken or damaged PTO guard can be just as dangerous as an unprotected shaft. In addition, a poorly fitting PTO guard may provide a false sense of security. For this reason, it’s important to use protective clothing when operating a tractor or implement powered by a PTO.
Shield
The CZPT-Co universal fit PTO shaft shield is a simple and easy to use shield that has a patented lever release. The shield comes in two sizes, the smaller diameter shield is for shafts with a diameter of 1 5/16″ to 2 1/8″ and the larger diameter shield fits shafts of 2″ to 3 1/8″. Each shield is pre-installed with an assortment of bearings. The shield’s length is measured from the end of the yoke bearing groove to the other end.
If you’ve ever tried to work on a PTO shaft, you know that it can be frustrating. A PTO shaft shield is a safety device that covers the shaft and prevents it from rotating. These shields are also designed to be easy to connect and remove. The CZPT safety clip makes it easy to connect or disconnect the shield, and locks into place to prevent it from rotating with the inner driveshaft. The CZPT material used in RPM Transmissions driveline safety shields is strong and rigid.
Another improvement of this PTO shaft shield is the bracket that supports the two-piece PTO shaft and outer shield. The bracket is shown in FIG. 2 as an angled front view. FIG. 7 is a side elevation view of the bracket mounted to the machine tongue.
editor by CX 2023-04-04